Home / Karbonn / Karbonn Aura 1

How To Flash Stock Rom Firmware On Karbonn Aura 1

These are the instructions to download Flash or install Stock Firmware (ROM) on Karbonn Aura 1 (Original firmware) , If you searching for the Karbonn Aura 1 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Karbonn Aura 1 , Here you can download the Official Karbonn Aura 1 Stock Firmware ROM (flash file) on your Computer

Download Karbonn Aura 1 Stock Rom (Original firmware)

Requirements: Your Karbonn Aura 1 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Karbonn_Aura_1_v10035_18082015_QFIL-[flash-file.net].zip
Flash File Size: 928 MB
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on Karbonn Aura 1

To install the Stock Firmware on Karbonn Aura 1 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Karbonn Aura 1 .

Step 1: Donload and install Karbonn Aura 1 USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Guide To flash Official Stock ROM On Android device Step 5: Now, Switch Off your Karbonn Aura 1 device. Step 6: Once your Karbonn Aura 1 device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn). Guide To flash Official Stock ROM On Android device   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. flash Official Stock ROM On Android device Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Karbonn Aura 1 device will be reboot automatically. Thats It, We are done!. Now disconnect your Karbonn Aura 1 device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Karbonn Aura 1 using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Karbonn Aura 1 Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Karbonn Aura 1 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Karbonn Aura 1:If you would like to know how to root your Karbonn Aura 1 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Karbonn A6 Turbo

These are the instructions to download Flash or install Stock Firmware (ROM) on Karbonn A6 …

Leave a Reply

Your email address will not be published. Required fields are marked *