How To Flash Stock Rom Firmware On Karbonn K9 Smart 4G Mintoak

These are the instructions to download Flash or install Stock Firmware (ROM) on Karbonn K9 Smart 4G Mintoak (Original firmware) , If you searching for the Karbonn K9 Smart 4G Mintoak Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Karbonn K9 Smart 4G Mintoak , Here you can download the Official Karbonn K9 Smart 4G Mintoak Stock Firmware ROM (flash file) on your Computer

Download Karbonn K9 Smart 4G Mintoak Stock Rom (Original firmware)

Requirements: Your Karbonn K9 Smart 4G Mintoak Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Karbonn_K9_Smart_4G_Mintoak_MT6737M_V12_20180208-[flash-file.net].zip
Flash File Size: 995 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Karbonn K9 Smart 4G Mintoak

To install the Stock Firmware on Karbonn K9 Smart 4G Mintoak , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Karbonn K9 Smart 4G Mintoak .

STEP 1: Download and Install the Karbonn K9 Smart 4G Mintoak USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Karbonn K9 Smart 4G Mintoak device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Karbonn K9 Smart 4G Mintoak to your system using the USB cable and , press any button other than power button so that your system will detect your Karbonn K9 Smart 4G Mintoak Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Karbonn K9 Smart 4G Mintoak and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Karbonn K9 Smart 4G Mintoak using SP Flash Tool.

Keep in mind:

[*] Karbonn K9 Smart 4G Mintoak Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Karbonn K9 Smart 4G Mintoak Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Karbonn K9 Smart 4G Mintoak:If you would like to know how to root your Karbonn K9 Smart 4G Mintoak android device, drop a comment below. We will share the tutorial for your device as quickly as possible .