These are the instructions to download Flash or install Stock Firmware (ROM) on Karbonn K9 Viraat 4G (Original firmware) , If you searching for the Karbonn K9 Viraat 4G Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Karbonn K9 Viraat 4G , Here you can download the Official Karbonn K9 Viraat 4G Stock Firmware ROM (flash file) on your Computer
Download Karbonn K9 Viraat 4G Stock Rom (Original firmware)
Requirements: Your Karbonn K9 Viraat 4G Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on Karbonn K9 Viraat 4G
To install the Stock Firmware on Karbonn K9 Viraat 4G , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Karbonn K9 Viraat 4G .
STEP 1: Download and Install the Karbonn K9 Viraat 4G USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Karbonn K9 Viraat 4G device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Karbonn K9 Viraat 4G to your system using the USB cable and , press any button other than power button so that your system will detect your Karbonn K9 Viraat 4G Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Karbonn K9 Viraat 4G and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Karbonn K9 Viraat 4G using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Karbonn K9 Viraat 4G Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Karbonn K9 Viraat 4G:If you would like to know how to root your Karbonn K9 Viraat 4G android device, drop a comment below. We will share the tutorial for your device as quickly as possible .