How To Flash Stock Rom Firmware On Kenxinda J7

These are the instructions to download Flash or install Stock Firmware (ROM) on Kenxinda J7 (Original firmware) , If you searching for the Kenxinda J7 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Kenxinda J7 , Here you can download the Official Kenxinda J7 Stock Firmware ROM (flash file) on your Computer

Download Kenxinda J7 Stock Rom (Original firmware)

Requirements: Your Kenxinda J7 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Kenxinda_J7_191216_5.0_SPD-[flash-file.net].zip
Flash File Size: 684 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Kenxinda J7

To install the Stock Firmware on Kenxinda J7 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Kenxinda J7 .

Step 1: Download and Install Kenxinda J7 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Kenxinda J7 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Kenxinda J7 Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Kenxinda J7 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Kenxinda J7 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Kenxinda J7 using Spreadtrum Upgrade Tool. Once your Kenxinda J7 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Kenxinda J7 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Kenxinda J7 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Kenxinda J7 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Kenxinda J7:If you would like to know how to root your Kenxinda J7 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .