Home / Lenovo / Lenovo A2010A-T

How To Flash Stock Rom Firmware On Lenovo A2010A-T

These are the instructions to download Flash or install Stock Firmware (ROM) on Lenovo A2010A-T (Original firmware) , If you searching for the Lenovo A2010A-T Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Lenovo A2010A-T , Here you can download the Official Lenovo A2010A-T Stock Firmware ROM (flash file) on your Computer

Download Lenovo A2010A-T Stock Rom (Original firmware)

Requirements: Your Lenovo A2010A-T Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Lenovo_A2010A-T_MT6735M_S255_151022_8G_ROW-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Lenovo A2010A-T

To install the Stock Firmware on Lenovo A2010A-T , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Lenovo A2010A-T .

STEP 1: Download and Install the Lenovo A2010A-T USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Lenovo A2010A-T device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Lenovo A2010A-T to your system using the USB cable and , press any button other than power button so that your system will detect your Lenovo A2010A-T Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Lenovo A2010A-T and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Lenovo A2010A-T using SP Flash Tool.

Keep in mind:

[*] Lenovo A2010A-T Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Lenovo A2010A-T Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Lenovo A2010A-T:If you would like to know how to root your Lenovo A2010A-T android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Lenovo K910L

These are the instructions to download Flash or install Stock Firmware (ROM) on Lenovo K910L …

Leave a Reply

Your email address will not be published. Required fields are marked *