How To Flash Stock Rom Firmware On Lenovo Tab 2 A7-30D
These are the instructions to download Flash or install Stock Firmware (ROM) on Lenovo Tab 2 A7-30D (Original firmware) , If you searching for the Lenovo Tab 2 A7-30D Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Lenovo Tab 2 A7-30D , Here you can download the Official Lenovo Tab 2 A7-30D Stock Firmware ROM (flash file) on your Computer
Download Lenovo Tab 2 A7-30D Stock Rom (Original firmware)
Requirements: Your Lenovo Tab 2 A7-30D Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Lenovo_Tab_2_A7-30D_MT6582_S000122_150831-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Lenovo Tab 2 A7-30D
To install the Stock Firmware on Lenovo Tab 2 A7-30D , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Lenovo Tab 2 A7-30D .
STEP 1: Download and Install the Lenovo Tab 2 A7-30D USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Lenovo Tab 2 A7-30D device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.


STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process.
STEP 9: After completed all the above steps, connect your Lenovo Tab 2 A7-30D to your system using the USB cable and , press any button other than power button so that your system will detect your Lenovo Tab 2 A7-30D Device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Lenovo Tab 2 A7-30D and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Lenovo Tab 2 A7-30D using SP Flash Tool.
Keep in mind:
[*] Lenovo Tab 2 A7-30D Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Lenovo Tab 2 A7-30D Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Lenovo Tab 2 A7-30D:If you would like to know how to root your Lenovo Tab 2 A7-30D android device, drop a comment below. We will share the tutorial for your device as quickly as possible .