Home / Lmkj / Lmkj A10 Pro

How To Flash Stock Rom Firmware On Lmkj A10 Pro

These are the instructions to download Flash or install Stock Firmware (ROM) on Lmkj A10 Pro (Original firmware) , If you searching for the Lmkj A10 Pro Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Lmkj A10 Pro , Here you can download the Official Lmkj A10 Pro Stock Firmware ROM (flash file) on your Computer.

Download Lmkj A10 Pro Stock Rom (Original firmware)

Requirements: Your Lmkj A10 Pro Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Lmkj_A10_Pro_MT6580_180529_5.1-[flash-file.net].zip
Flash File Size: 535 MB

Download Flash File


Flash File Name: Lmkj_A10_Pro_MT6580_270618_5.1-[flash-file.net].zip
Flash File Size: 542 MB

Download Flash File

How to Flash Stock Firmware ROM on Lmkj A10 Pro

To install the Stock Firmware on Lmkj A10 Pro , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Lmkj A10 Pro .

STEP 1: Download and Install the Lmkj A10 Pro USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Lmkj A10 Pro device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Lmkj A10 Pro to your system using the USB cable and , press any button other than power button so that your system will detect your Lmkj A10 Pro Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Lmkj A10 Pro and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Lmkj A10 Pro using SP Flash Tool.

Keep in mind:

[*] Lmkj A10 Pro Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Lmkj A10 Pro Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.

[*] Broken link Report here.

[*] ROOT Lmkj A10 Pro:If you would like to know how to root your Lmkj A10 Pro android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Lmkj F3

These are the instructions to download Flash or install Stock Firmware (ROM) on Lmkj F3 …

Leave a Reply

Your email address will not be published. Required fields are marked *