How To Flash Stock Rom Firmware On LYF FL7008

These are the instructions to download Flash or install Stock Firmware (ROM) on LYF FL7008 (Original firmware) , If you searching for the LYF FL7008 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on LYF FL7008 , Here you can download the Official LYF FL7008 Stock Firmware ROM (flash file) on your Computer

Download LYF FL7008 Stock Rom (Original firmware)

Requirements: Your LYF FL7008 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: LYF_FL7008_1.3.4.0_5.1.1_QFIL-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on LYF FL7008

To install the Stock Firmware on LYF FL7008 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on LYF FL7008 .

Step 1: Donload and install LYF FL7008 USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Step 5: Now, Switch Off your LYF FL7008 device. Step 6: Once your LYF FL7008 device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn).   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your LYF FL7008 device will be reboot automatically. Thats It, We are done!. Now disconnect your LYF FL7008 device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your LYF FL7008 using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] LYF FL7008 Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing LYF FL7008 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT LYF FL7008:If you would like to know how to root your LYF FL7008 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .