How To Flash Stock Rom Firmware On Lyf Water 9 LS-5506

These are the instructions to download Flash or install Stock Firmware (ROM) on Lyf Water 9 LS-5506 (Original firmware) , If you searching for the Lyf Water 9 LS-5506 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Lyf Water 9 LS-5506 , Here you can download the Official Lyf Water 9 LS-5506 Stock Firmware ROM (flash file) on your Computer

Download Lyf Water 9 LS-5506 Stock Rom (Original firmware)

Requirements: Your Lyf Water 9 LS-5506 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Lyf_Water_9_LS-5506_MT6753_5.1_08052016-[flash-file.net].zip
Flash File Size: 1 GB
ROM Android Version: 5.1
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

---

Flash File Name: Lyf_LS5506_MT6753_5.1_08052016-[flash-file.net].zip
Flash File Size: 1 GB
ROM Android Version: 5.1
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Lyf Water 9 LS-5506

To install the Stock Firmware on Lyf Water 9 LS-5506 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Lyf Water 9 LS-5506 .

STEP 1: Download and Install the Lyf Water 9 LS-5506 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Lyf Water 9 LS-5506 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Lyf Water 9 LS-5506 to your system using the USB cable and , press any button other than power button so that your system will detect your Lyf Water 9 LS-5506 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Lyf Water 9 LS-5506 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Lyf Water 9 LS-5506 using SP Flash Tool.

Keep in mind:

[*] Lyf Water 9 LS-5506 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Lyf Water 9 LS-5506 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Lyf Water 9 LS-5506:If you would like to know how to root your Lyf Water 9 LS-5506 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .