How To Flash Stock Rom Firmware On M-Horse Butterfly 3

These are the instructions to download Flash or install Stock Firmware (ROM) on M-Horse Butterfly 3 (Original firmware) , If you searching for the M-Horse Butterfly 3 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on M-Horse Butterfly 3 , Here you can download the Official M-Horse Butterfly 3 Stock Firmware ROM (flash file) on your Computer

Download M-Horse Butterfly 3 Stock Rom (Original firmware)

Requirements: Your M-Horse Butterfly 3 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: M_Horse_Buterfly_3_SC6820_2.3.5-[flash-file.net].zip
Flash File Size: 165 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

---

Flash File Name: M_Horse_Buterfly_3_SC7731_5.1-[flash-file.net].zip
Flash File Size: 470 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

---

Flash File Name: M_Horse_Buterfly_3_MT6572_4.2.2-[flash-file.net].zip
Flash File Size: 330 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

---

Flash File Name: M_Horse_Buterfly_3_MT6580_6.0-[flash-file.net].zip
Flash File Size: 698 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on M-Horse Butterfly 3

To install the Stock Firmware on M-Horse Butterfly 3 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on M-Horse Butterfly 3 .

STEP 1: Download and Install the M-Horse Butterfly 3 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your M-Horse Butterfly 3 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your M-Horse Butterfly 3 to your system using the USB cable and , press any button other than power button so that your system will detect your M-Horse Butterfly 3 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your M-Horse Butterfly 3 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your M-Horse Butterfly 3 using SP Flash Tool.

Keep in mind:

[*] M-Horse Butterfly 3 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing M-Horse Butterfly 3 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT M-Horse Butterfly 3:If you would like to know how to root your M-Horse Butterfly 3 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .