How To Flash Stock Rom Firmware On Micromax E311

These are the instructions to download Flash or install Stock Firmware (ROM) on Micromax E311 (Original firmware) , If you searching for the Micromax E311 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Micromax E311 , Here you can download the Official Micromax E311 Stock Firmware ROM (flash file) on your Computer

Download Micromax E311 Stock Rom (Original firmware)

Requirements: Your Micromax E311 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Micromax_E311_MT6592_V1_270315-[flash-file.net].zip
Flash File Size: 772 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

---

Flash File Name: Micromax_E311_MT6592_V2_280515-[flash-file.net].zip
Flash File Size: 801 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

---

Flash File Name: Micromax_E311_MT6592_V3_080615-[flash-file.net].zip
Flash File Size: 803 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

---

Flash File Name: Micromax_E311_MT6592_V4_180815-[flash-file.net].zip
Flash File Size: 844 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Micromax E311

To install the Stock Firmware on Micromax E311 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Micromax E311 .

STEP 1: Download and Install the Micromax E311 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Micromax E311 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Micromax E311 to your system using the USB cable and , press any button other than power button so that your system will detect your Micromax E311 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Micromax E311 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Micromax E311 using SP Flash Tool.

Keep in mind:

[*] Micromax E311 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Micromax E311 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Micromax E311:If you would like to know how to root your Micromax E311 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .