These are the instructions to download Flash or install Stock Firmware (ROM) on Micromax P250 (Original firmware) , If you searching for the Micromax P250 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Micromax P250 , Here you can download the Official Micromax P250 Stock Firmware ROM (flash file) on your Computer
Download Micromax P250 Stock Rom (Original firmware)
Requirements: Your Micromax P250 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Micromax_P250_V1_140812-[flash-file.net].zip
Flash File Size: 307 MB
Flash Tool Link: LiveSuit Tool
How to Flash Stock Firmware ROM on Micromax P250
To install the Stock Firmware on Micromax P250 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Micromax P250 .
Step 1: Download and install Micromax P250 ADB Drivers on your computer. Step 2: Download and extract LiveSuit Application on your computer. After Extracting you will be able to see the following files: Step 3: Now LiveSuit.exe from the extracted files. Step 4: Once LiveSuit.exe is launched, Select Yes to follow the Upgrade Wizard. Step 5: Now, You have to select the Upgrade Mode which is General and Mandatory. Click on Mandatory to continue. Step 6: Now, Unplug all the connected Micromax P250 device from the computer (if you have already connected), then Click on Yes button to Continue. Step 7: Next, You have to select the .img firmware. If you are ready Click on Yes Button and select the firmware. Step 8: Now, Dont Click on Finish Button.
Step 9: Now, It is the right time to connect your Micromax P250 device to the Computer using USB Cable. Before Connecting the Micromax P250 device, make sure its Power Off. Firstly Connect the USB Cable to the Computer then on your Micromax P250 device Press Volume Down Key and Connect the USB Cable to it. While holding the Volume Down Key immediately Press Power Key for 10 times, so that the computer can recognize your Android device.
Step 10: Once your Micromax P250 device is successfully recognized by your computer, you will be able to see the following Window saying to Mandatory Format the Device. Click on Yes to Continue. Step 11: On the next Windows, again click on Yes Button to continue.
Step 12: Now LiveSuite will start the flashing process (flashing usually takes 4-6 minutes to complete). Step 13: Once Flashing is completed successfully then you will be able to see Upgrade Succeeds Window. Click on OK to Close it. Step 14: Now, close LiveSuit Application by clicking on the Exit Button. Step 15: Disconnect your Android device from the Computer and Restart it.
Congratulations, Now you have successfully flashed the stock firmware on your Micromax P250 using LiveSuit Application.
Keep in mind:
[*] Micromax P250 Flash Tool: If you need to download the latest version of LiveSuit Flash Tool, then head over to LiveSuit Flash Tool .
[*] Backup Please: Take a backup of your important data before Flashing Micromax P250 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Micromax P250:If you would like to know how to root your Micromax P250 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .