Home / Micromax / Micromax Q310

How To Flash Stock Rom Firmware On Micromax Q310

These are the instructions to download Flash or install Stock Firmware (ROM) on Micromax Q310 (Original firmware) , If you searching for the Micromax Q310 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Micromax Q310 , Here you can download the Official Micromax Q310 Stock Firmware ROM (flash file) on your Computer

Download Micromax Q310 Stock Rom (Original firmware)

Requirements: Your Micromax Q310 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Micromax_Q310_SW_V2.0_HW_V2.0_RU_05042016_SPD-[flash-file.net].zip
Flash File Size: 630 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Micromax Q310

To install the Stock Firmware on Micromax Q310 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Micromax Q310 .

Step 1: Download and Install Micromax Q310 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Micromax Q310 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Micromax Q310 Device to the computer (make sure your Android Device is switch off).

Guide To flash Official Stock ROM On Android Device

Step 6: Once your Micromax Q310 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).Guide To flash Official Stock ROM On Android Device Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Guide To flash Official Stock ROM On Android Device

Step 8: During the flashing process your Micromax Q310 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device

Step 9: Now you have successfully flashed your Micromax Q310 using Spreadtrum Upgrade Tool. Once your Micromax Q310 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Micromax Q310 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Micromax Q310 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Micromax Q310 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Micromax Q310:If you would like to know how to root your Micromax Q310 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Micromax A24

These are the instructions to download Flash or install Stock Firmware (ROM) on Micromax A24 …

Leave a Reply

Your email address will not be published. Required fields are marked *