Home / Micromax / Micromax Q491

How To Flash Stock Rom Firmware On Micromax Q491

These are the instructions to download Flash or install Stock Firmware (ROM) on Micromax Q491 (Original firmware) , If you searching for the Micromax Q491 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Micromax Q491 , Here you can download the Official Micromax Q491 Stock Firmware ROM (flash file) on your Computer

Download Micromax Q491 Stock Rom (Original firmware)

Requirements: Your Micromax Q491 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Micromax_Q491_MSM8916_V125_M30_MP_0122_QFIL-[flash-file.net].zip
Flash File Size: 993 MB
Flash Tool Link: Qfil Tool

Download Flash File


Flash File Name: Micromax_Q491_V125_M30_MP_0122_QFIL-[flash-file.net].zip
Flash File Size: 993 MB
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on Micromax Q491

To install the Stock Firmware on Micromax Q491 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Micromax Q491 .

Step 1: Donload and install Micromax Q491 USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Guide To flash Official Stock ROM On Android device Step 5: Now, Switch Off your Micromax Q491 device. Step 6: Once your Micromax Q491 device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn). Guide To flash Official Stock ROM On Android device   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. flash Official Stock ROM On Android device Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Micromax Q491 device will be reboot automatically. Thats It, We are done!. Now disconnect your Micromax Q491 device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Micromax Q491 using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Micromax Q491 Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Micromax Q491 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Micromax Q491:If you would like to know how to root your Micromax Q491 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Micromax A24

These are the instructions to download Flash or install Stock Firmware (ROM) on Micromax A24 …

Leave a Reply

Your email address will not be published.