Home / Micromax / Micromax V407

How To Flash Stock Rom Firmware On Micromax V407

These are the instructions to download Flash or install Stock Firmware (ROM) on Micromax V407 (Original firmware) , If you searching for the Micromax V407 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Micromax V407 , Here you can download the Official Micromax V407 Stock Firmware ROM (flash file) on your Computer

Download Micromax V407 Stock Rom (Original firmware)

Requirements: Your Micromax V407 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Micromax_V407_SW_V173_HW_VLQJ002_01122017_20171201_QFIL-[flash-file.net].zip
Flash File Size: 388 MB
Flash Tool Link: Qfil Tool

Download Flash File


Flash File Name: Micromax_V407_SW_V174_HW_VLQJ002_23042018_20180423_QFIL-[flash-file.net].zip
Flash File Size: 389 MB
Flash Tool Link: Qfil Tool

Download Flash File


Flash File Name: Micromax_V407_V1_08022018_Single_SIM_QFIL-[flash-file.net].zip
Flash File Size: 367 MB
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on Micromax V407

To install the Stock Firmware on Micromax V407 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Micromax V407 .

Step 1: Donload and install Micromax V407 USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Guide To flash Official Stock ROM On Android device Step 5: Now, Switch Off your Micromax V407 device. Step 6: Once your Micromax V407 device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn). Guide To flash Official Stock ROM On Android device   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. flash Official Stock ROM On Android device Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Micromax V407 device will be reboot automatically. Thats It, We are done!. Now disconnect your Micromax V407 device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Micromax V407 using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Micromax V407 Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Micromax V407 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Micromax V407:If you would like to know how to root your Micromax V407 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Micromax A24

These are the instructions to download Flash or install Stock Firmware (ROM) on Micromax A24 …

Leave a Reply

Your email address will not be published. Required fields are marked *