Home / Noain / Noain T300

How To Flash Stock Rom Firmware On Noain T300

These are the instructions to download Flash or install Stock Firmware (ROM) on Noain T300 (Original firmware) , If you searching for the Noain T300 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Noain T300 , Here you can download the Official Noain T300 Stock Firmware ROM (flash file) on your Computer.

Download Noain T300 Stock Rom (Original firmware)

Requirements: Your Noain T300 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Noain_T300_MT6572_4.2.2-[flash-file.net].zip
Flash File Size: 370 MB

Download Flash File

How to Flash Stock Firmware ROM on Noain T300

To install the Stock Firmware on Noain T300 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Noain T300 .

STEP 1: Download and Install the Noain T300 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Noain T300 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Noain T300 to your system using the USB cable and , press any button other than power button so that your system will detect your Noain T300 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Noain T300 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Noain T300 using SP Flash Tool.

Keep in mind:

[*] Noain T300 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Noain T300 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.

[*] Broken link Report here.

[*] ROOT Noain T300:If you would like to know how to root your Noain T300 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Noain 7 Plus

These are the instructions to download Flash or install Stock Firmware (ROM) on Noain 7 …

Leave a Reply

Your email address will not be published. Required fields are marked *