These are the instructions to download Flash or install Stock Firmware (ROM) on Orro J7 Prime 2 (Original firmware) , If you searching for the Orro J7 Prime 2 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Orro J7 Prime 2 , Here you can download the Official Orro J7 Prime 2 Stock Firmware ROM (flash file) on your Computer.
DownloadOrro J7 Prime 2 Stock Rom (Original firmware)
Requirements: Your Orro J7 Prime 2 Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on Orro J7 Prime 2
To install the Stock Firmware on Orro J7 Prime 2 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Orro J7 Prime 2 .
STEP 1: Download and Install the Orro J7 Prime 2 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Orro J7 Prime 2 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Orro J7 Prime 2 to your system using the USB cable and , press any button other than power button so that your system will detect your Orro J7 Prime 2 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Orro J7 Prime 2 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Orro J7 Prime 2 using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Orro J7 Prime 2 Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Orro J7 Prime 2:If you would like to know how to root your Orro J7 Prime 2 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .