These are the instructions to download Flash or install Stock Firmware (ROM) on Orro S10 Plus (Original firmware) , If you searching for the Orro S10 Plus Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Orro S10 Plus , Here you can download the Official Orro S10 Plus Stock Firmware ROM (flash file) on your Computer.
DownloadOrro S10 Plus Stock Rom (Original firmware)
Requirements: Your Orro S10 Plus Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Orro_S10_Plus_MT6580_5.1-[flash-file.net].zip
Flash File Size: 708 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Orro S10 Plus
To install the Stock Firmware on Orro S10 Plus , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Orro S10 Plus .
STEP 1: Download and Install the Orro S10 Plus USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Orro S10 Plus device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Orro S10 Plus to your system using the USB cable and , press any button other than power button so that your system will detect your Orro S10 Plus Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Orro S10 Plus and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Orro S10 Plus using SP Flash Tool.
Keep in mind:
[*] Orro S10 Plus Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Orro S10 Plus Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Orro S10 Plus:If you would like to know how to root your Orro S10 Plus android device, drop a comment below. We will share the tutorial for your device as quickly as possible .