How To Flash Stock Rom Firmware On Orro S6 Edge

These are the instructions to download Flash or install Stock Firmware (ROM) on Orro S6 Edge (Original firmware) , If you searching for the Orro S6 Edge Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Orro S6 Edge , Here you can download the Official Orro S6 Edge Stock Firmware ROM (flash file) on your Computer.

DownloadOrro S6 Edge Stock Rom (Original firmware)

Requirements: Your Orro S6 Edge Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Orro_S6_Edge_MT6572_20160309_4.4.2-[flash-file.net].zip
Flash File Size: 451 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

---

Flash File Name: Orro_S6_Edge_MT6580_20160707_5.1-[flash-file.net].zip
Flash File Size: 716 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

---

Flash File Name: Orro_S6_Edge_SC6820_2.3.5_SPD-[flash-file.net].zip
Flash File Size: 127 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Orro S6 Edge

To install the Stock Firmware on Orro S6 Edge , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Orro S6 Edge .

STEP 1: Download and Install the Orro S6 Edge USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Orro S6 Edge device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Orro S6 Edge to your system using the USB cable and , press any button other than power button so that your system will detect your Orro S6 Edge Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Orro S6 Edge and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Orro S6 Edge using SP Flash Tool.

Keep in mind:

[*] Orro S6 Edge Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Orro S6 Edge Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Orro S6 Edge:If you would like to know how to root your Orro S6 Edge android device, drop a comment below. We will share the tutorial for your device as quickly as possible .