Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Panasonic Eluga Icon 2 (Original firmware) , If you searching for the Panasonic Eluga Icon 2 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Panasonic Eluga Icon 2 , Here you can download the Official Panasonic Eluga Icon 2 Stock Firmware ROM (flash file) on your Computer
Download Panasonic Eluga Icon 2 Stock Rom (Original firmware)
Requirements: Your Panasonic Eluga Icon 2 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Panasonic_Eluga_Icon_2_SW_T82918AA1_V1012_20160414-[flash-file.net].zip
Flash File Size: 900 MB
Flash Tool Link: Lenovo Downloader
Flash File Name: Panasonic_Eluga_Icon_2_150911_4.4_CPB-[flash-file.net].zip
Flash File Size: 534 MB
Flash Tool Link: YGDP Tool
How to Flash Stock Firmware ROM on Panasonic Eluga Icon 2
To install the Stock Firmware on Panasonic Eluga Icon 2 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Panasonic Eluga Icon 2 .
Step 1: Download and install Panasonic Eluga Icon 2 USB Driver on your Windows Computer (if you have already installed the correct drivers then SKIP this step). 
Step 2: Download and extract Lenovo Downloader Tool Qualcomm Chipsets on your Computer. After extracting, you will be able to see the following files. 
Step 3: Now, Open QcomDLoader.exe. Once it is launched you will be able to see the following screen.
Step 4: Now, Click on Load Button and Select the Panasonic Eluga Icon 2 Firmware Folder (that you have downloaded) that you wanted to flash on your Device:
Step 5: Now, Click on Start Button:
Step 6: Now, Turn Off the Panasonic Eluga Icon 2 Device with Uncheck Fastboot and Press Volume UP or Volume Down Button and Connect Panasonic Eluga Icon 2 Device Device to the Computer using the USB Cable.
Step 7: Once your Panasonic Eluga Icon 2 Device is detected by the computer, Lenovo Downloader Tool will automatically start the flashing process on your Panasonic Eluga Icon 2 Device.
Step 8: Flashing process may take upto 5-10 minutes to complete. And Once flashing process is completed you will be able to see the Green Passed Message.
Congratulations, Now you have successfully flashed the stock firmware on your Panasonic Eluga Icon 2 using Lenovo Downloader Tool.
Keep in mind:
[*] Lenovo Downloader Tool]: If you need to download the latest version of Lenovo Downloader, then head over to Lenovo Downloader .
[*] Backup Please: Take a backup of your important data before Flashing Panasonic Eluga Icon 2 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Panasonic Eluga Icon 2:If you would like to know how to root your Panasonic Eluga Icon 2 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
