Home / Qmobile / Qmobile M90

How To Flash Stock Rom Firmware On Qmobile M90

These are the instructions to download Flash or install Stock Firmware (ROM) on Qmobile M90 (Original firmware) , If you searching for the Qmobile M90 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Qmobile M90 , Here you can download the Official Qmobile M90 Stock Firmware ROM (flash file) on your Computer

Download Qmobile M90 Stock Rom (Original firmware)

Requirements: Your Qmobile M90 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Qmobile_M90_MT6582_4.4.2_ALPS.KK1.MP1.V2.10-[flash-file.net].zip
Flash File Size: 821 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Qmobile M90

To install the Stock Firmware on Qmobile M90 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Qmobile M90 .

STEP 1: Download and Install the Qmobile M90 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Qmobile M90 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Qmobile M90 STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Qmobile M90How To Flash Stock Rom Firmware On Qmobile M90

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Qmobile M90 STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Qmobile M90 STEP 9: After completed all the above steps, connect your Qmobile M90 to your system using the USB cable and , press any button other than power button so that your system will detect your Qmobile M90 Device. You can use volume buttons. How To Flash Stock Rom Firmware On Qmobile M90 How To Flash Stock Rom Firmware On Qmobile M90 Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Qmobile M90 and switch it ON.How To Flash Stock Rom Firmware On Qmobile M90How To Flash Stock Rom Firmware On Qmobile M90Congratulations, Now you have successfully flashed the stock firmware on your Qmobile M90 using SP Flash Tool.

Keep in mind:

[*] Qmobile M90 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Qmobile M90 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Qmobile M90:If you would like to know how to root your Qmobile M90 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On QMobile QS16

QMobile QS16

These are the instructions to download Flash or install Stock Firmware (ROM) on QMobile QS16 …

Leave a Reply

%d bloggers like this: