These are the instructions to download Flash or install Stock Firmware (ROM) on Rage Supremo 5.0 (Original firmware) , If you searching for the Rage Supremo 5.0 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Rage Supremo 5.0 , Here you can download the Official Rage Supremo 5.0 Stock Firmware ROM (flash file) on your Computer
Download Rage Supremo 5.0 Stock Rom (Original firmware)
Requirements: Your Rage Supremo 5.0 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Rage_Supremo_5.0_V3.0_20150917-[flash-file.net].zip
Flash File Size: 523 MB
Flash Tool Link: SPD Flash Tool
How to Flash Stock Firmware ROM on Rage Supremo 5.0
To install the Stock Firmware on Rage Supremo 5.0 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Rage Supremo 5.0 .
Step 1: Download and Install Rage Supremo 5.0 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your Rage Supremo 5.0 Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Rage Supremo 5.0 Device to the computer (make sure your Android Device is switch off).
Step 6: Once your Rage Supremo 5.0 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your Rage Supremo 5.0 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Rage Supremo 5.0 using Spreadtrum Upgrade Tool. Once your Rage Supremo 5.0 Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your Rage Supremo 5.0 using Spreadtrum Upgrade Tool
Keep in mind:
[*] Rage Supremo 5.0 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .
[*] Backup Please: Take a backup of your important data before Flashing Rage Supremo 5.0 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Rage Supremo 5.0:If you would like to know how to root your Rage Supremo 5.0 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .