How To Flash Stock Rom Firmware On Rivo Phantom PZ8

These are the instructions to download Flash or install Stock Firmware (ROM) on Rivo Phantom PZ8 (Original firmware) , If you searching for the Rivo Phantom PZ8 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Rivo Phantom PZ8 , Here you can download the Official Rivo Phantom PZ8 Stock Firmware ROM (flash file) on your Computer

Download Rivo Phantom PZ8 Stock Rom (Original firmware)

Requirements: Your Rivo Phantom PZ8 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Rivo_Phantom_PZ8_V4_QFIL-[flash-file.net].zip
Flash File Size: 653 MB
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on Rivo Phantom PZ8

To install the Stock Firmware on Rivo Phantom PZ8 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Rivo Phantom PZ8 .

Step 1: Donload and install Rivo Phantom PZ8 USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Step 5: Now, Switch Off your Rivo Phantom PZ8 device. Step 6: Once your Rivo Phantom PZ8 device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn).   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Rivo Phantom PZ8 device will be reboot automatically. Thats It, We are done!. Now disconnect your Rivo Phantom PZ8 device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Rivo Phantom PZ8 using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Rivo Phantom PZ8 Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Rivo Phantom PZ8 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Rivo Phantom PZ8:If you would like to know how to root your Rivo Phantom PZ8 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .