Home / Rivo / Rivo R10 Pro

How To Flash Stock Rom Firmware On Rivo R10 Pro

These are the instructions to download Flash or install Stock Firmware (ROM) on Rivo R10 Pro (Original firmware) , If you searching for the Rivo R10 Pro Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Rivo R10 Pro , Here you can download the Official Rivo R10 Pro Stock Firmware ROM (flash file) on your Computer

Download Rivo R10 Pro Stock Rom (Original firmware)

Requirements: Your Rivo R10 Pro Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Rivo_R10_Pro_MT6580_09072017_6.0-[flash-file.net].zip
Flash File Size: 622 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Rivo R10 Pro

To install the Stock Firmware on Rivo R10 Pro , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Rivo R10 Pro .

STEP 1: Download and Install the Rivo R10 Pro USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Rivo R10 Pro device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Rivo R10 Pro to your system using the USB cable and , press any button other than power button so that your system will detect your Rivo R10 Pro Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Rivo R10 Pro and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Rivo R10 Pro using SP Flash Tool.

Keep in mind:

[*] Rivo R10 Pro Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Rivo R10 Pro Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Rivo R10 Pro:If you would like to know how to root your Rivo R10 Pro android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Rivo Rhythm RX180

These are the instructions to download Flash or install Stock Firmware (ROM) on Rivo Rhythm …

Leave a Reply

Your email address will not be published. Required fields are marked *