Home / Rivo / Rivo Rhythm RX180

How To Flash Stock Rom Firmware On Rivo Rhythm RX180

These are the instructions to download Flash or install Stock Firmware (ROM) on Rivo Rhythm RX180 (Original firmware) , If you searching for the Rivo Rhythm RX180 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Rivo Rhythm RX180 , Here you can download the Official Rivo Rhythm RX180 Stock Firmware ROM (flash file) on your Computer

Download Rivo Rhythm RX180 Stock Rom (Original firmware)

Requirements: Your Rivo Rhythm RX180 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Rivo_Rhythm_RX180_MT6580_5.1-[flash-file.net].zip
Flash File Size: 519 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Rivo Rhythm RX180

To install the Stock Firmware on Rivo Rhythm RX180 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Rivo Rhythm RX180 .

STEP 1: Download and Install the Rivo Rhythm RX180 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Rivo Rhythm RX180 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Rivo Rhythm RX180 to your system using the USB cable and , press any button other than power button so that your system will detect your Rivo Rhythm RX180 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Rivo Rhythm RX180 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Rivo Rhythm RX180 using SP Flash Tool.

Keep in mind:

[*] Rivo Rhythm RX180 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Rivo Rhythm RX180 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Rivo Rhythm RX180:If you would like to know how to root your Rivo Rhythm RX180 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Rivo Phantom PZ1

These are the instructions to download Flash or install Stock Firmware (ROM) on Rivo Phantom …

Leave a Reply

Your email address will not be published. Required fields are marked *