Home / Samsung / Samsung B350E

How To Flash Stock Rom Firmware On Samsung B350E

These are the instructions to download Flash or install Stock Firmware (ROM) on Samsung B350E (Original firmware) , If you searching for the Samsung B350E Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Samsung B350E , Here you can download the Official Samsung B350E Stock Firmware ROM (flash file) on your Computer

Download Samsung B350E Stock Rom (Original firmware)

Requirements: Your Samsung B350E Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Samsung_Metro_B350E_XXUAPF2_OXEAPF2_3File-[flash-file.net].zip
Flash File Size: 34 MB
Flash Tool Link: Odin Downloader

Download Flash File

How to Flash Stock Firmware ROM on Samsung B350E

To install the Stock Firmware on Samsung B350E , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Samsung B350E .

Step 1Download and install Samsung B350E USB Driver on your computer (if Samsung USB Driver is already installed on your computer then SKIP this step). USB Logo Step 2Download and extract Odin Downloader on your Computer (if you already have Odin Downloader then SKIP this step). Odin Logo Step 3: Download and extract Samsung B350E Stock Firmware (4 files) on your computer. After extracting the firmware you will be able to see similar files (file name varies as per device model number): samsung firmware 4 file Step 4Power Off your Samsung B350E Device. Step 5: Now, you need to boot your Samsung B350E Device into the Download Mode. To boot into the download mode: Press and Hold Power + Home + Volume Down Key at the same time for 8 seconds. Step 6: Once you have booted into the download mode, you will be able to see the Warning Triangle on your Samsung B350E screen. Now, you need to press the Volume UP key to continue.

  Step 7: Open Odin Downloader (you have downloaded and extracted in step#2). Odin Logo Step 8: Once Odin Downloader is launched, you need to connect your Samsung B350E Device to the computer using the USB cable. Samsung Mobile Connect Computer Step 9: Once your Samsung B350E is connected, Odin will automatically detect it and you will be able to see Added message in Odin Log area. Auto Draft


Step 10: Now, Click on BL button and select the BL file from your firmware folder. Auto Draft Step 11: Now, Click on AP button and select the AP file from your firmware folder. Auto Draft


Step 12: Now, Click on CP button and select the CP file from your firmware folder. Auto Draft Step 13: Now, Click on CSC button and select the CSC file from your firmware folder. Auto Draft Step 14: Now, Click on Start button to begin the flashing process. Flashing Process may take more than 5 minutes to complete. Auto Draft Step 15: Once flashing process is completed, you will be able to see the Green Pass message in Odin. Now, disconnect your Samsung B350E from the computer. Auto Draft Step 16: Now, restart your Samsung B350E (ignore if your device is already started).

Congratulations, Now you have successfully flashed the stock firmware on your Samsung B350E using Odin Downloader.

Keep in mind:

[*] Samsung B350E Flash Tool: If you need to download the latest version of Odin Downloader Tool, then head over to Odin Downloader for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Samsung B350E Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Samsung B350E:If you would like to know how to root your Samsung B350E android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Samsung SM-G360H

These are the instructions to download Flash or install Stock Firmware (ROM) on Samsung SM-G360H …

Leave a Reply

Your email address will not be published. Required fields are marked *