These are the instructions to download Flash or install Stock Firmware (ROM) on Samsung SM-J106H (Original firmware) , If you searching for the Samsung SM-J106H Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Samsung SM-J106H , Here you can download the Official Samsung SM-J106H Stock Firmware ROM (flash file) on your Computer
Download Samsung SM-J106H Stock Rom (Original firmware)
Requirements: Your Samsung SM-J106H Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: SM-J106H_J106HDDS0AQH1_J106HODD0AQF1_BNG_6.0.1_5File.zip
ROM Country: Bangladesh
Flash File Size: 1 GB
ROM Android Version: 6.0.1
Flash Tool Link: Odin Downloader
How to Flash Stock Firmware ROM on Samsung SM-J106H
To install the Stock Firmware on Samsung SM-J106H , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Samsung SM-J106H .
Step 1: Download and install Samsung SM-J106H USB Driver on your computer (if Samsung USB Driver is already installed on your computer then SKIP this step). Step 2: Download and extract Odin Downloader on your Computer (if you already have Odin Downloader then SKIP this step). Step 3: Download and extract Samsung SM-J106H Stock Firmware (4 files) on your computer. After extracting the firmware you will be able to see similar files (file name varies as per device model number): Step 4: Power Off your Samsung SM-J106H Device. Step 5: Now, you need to boot your Samsung SM-J106H Device into the Download Mode. To boot into the download mode: Press and Hold Power + Home + Volume Down Key at the same time for 8 seconds. Step 6: Once you have booted into the download mode, you will be able to see the Warning Triangle on your Samsung SM-J106H screen. Now, you need to press the Volume UP key to continue.
Step 7: Open Odin Downloader (you have downloaded and extracted in step#2). Step 8: Once Odin Downloader is launched, you need to connect your Samsung SM-J106H Device to the computer using the USB cable. Step 9: Once your Samsung SM-J106H is connected, Odin will automatically detect it and you will be able to see Added message in Odin Log area.
Step 10: Now, Click on BL button and select the BL file from your firmware folder. Step 11: Now, Click on AP button and select the AP file from your firmware folder.
Step 12: Now, Click on CP button and select the CP file from your firmware folder. Step 13: Now, Click on CSC button and select the CSC file from your firmware folder. Step 14: Now, Click on Start button to begin the flashing process. Flashing Process may take more than 5 minutes to complete. Step 15: Once flashing process is completed, you will be able to see the Green Pass message in Odin. Now, disconnect your Samsung SM-J106H from the computer. Step 16: Now, restart your Samsung SM-J106H (ignore if your device is already started).
Congratulations, Now you have successfully flashed the stock firmware on your Samsung SM-J106H using Odin Downloader.
Keep in mind:
[*] Samsung SM-J106H Flash Tool: If you need to download the latest version of Odin Downloader Tool, then head over to Odin Downloader for WINDOWS .
[*] Backup Please: Take a backup of your important data before Flashing Samsung SM-J106H Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Samsung SM-J106H:If you would like to know how to root your Samsung SM-J106H android device, drop a comment below. We will share the tutorial for your device as quickly as possible .