These are the instructions to download Flash or install Stock Firmware (ROM) on Samsung SM-N920I (Original firmware) , If you searching for the Samsung SM-N920I Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Samsung SM-N920I , Here you can download the Official Samsung SM-N920I Stock Firmware ROM (flash file) on your Computer
Download Samsung SM-N920I Stock Rom (Original firmware)
Requirements: Your Samsung SM-N920I Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: SM-N920I_N920IDVU3CQK1_N920ITEL3CQK1_TEL_7.0.zip
ROM Country: Australia
Flash File Size: 2 GB
ROM Android Version: 7.0
Flash Tool Link: Odin Downloader
How to Flash Stock Firmware ROM on Samsung SM-N920I
To install the Stock Firmware on Samsung SM-N920I , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Samsung SM-N920I .
Step 1: Download and install Samsung SM-N920I USB Driver on your computer. In case you have already installed the Samsung SM-N920I USB Driver on your computer then Skip this step. Step 2: Download ( Samsung SM-N920I Stock ROM compatible with your Samsung SM-N920I or if you have already downloaded the firmware then ignore downloading it again) and extract it on your computer. After extracting you will be able to see these kind of files:
Step 3: Power Off your Samsung SM-N920I Device. Step 4: Now, you have to boot into Download mode. To boot into Download Mode: Press and Hold Volume Down Key, Home Key and Power Key. When phone vibrates Leave the Power Keybut Keep holding the Volume Down Key and Home key. You will boot into the Download Mode. Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Volume up key to continue. Step 6: Download and extract Odin on your computer. After extracting you will be able to see the following files: Step 7: Now, Open Odin3 and connect your Samsung SM-N920I to the computer. Step 8: Once you have connected the Samsung SM-N920I to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel. Step 9: Once your Samsung SM-N920I detected by Odin, click on the “PDA” button and select the tar.md5 file that you have extracted in Step #2. Step 10: Now, click on the “Start” button in Odin to begin the Flashing process. Step 11: Once you see, the Green Pass Message then remove the USB cable from the Samsung SM-N920I (during this process, your Samsung SM-N920I will restart automatically). Step 12: Your Samsung SM-N920I Device will now stuck at boot (boot loop). Now, You have to boot into Stock Recovery Mode, To Enable Stock Recovery mode: Press and Hold Volume UP key, HomeKey, Power Key. When phone vibrates Leave the Power Key but Keep holding the Volume UPKey and Home key. You will boot into the Recovery Mode. Step 13: In Recovery Mode, Wipe Data/factory reset. Step 14: Once Cache Data is cleared, Select Restart Phone Now from the recovery menu. Step 15: Now, your Samsung SM-N920I Device will restart without any issue with the Stock Rom you have downloaded.
Congratulations, Now you have successfully flashed the stock firmware on your Samsung SM-N920I using Odin
Keep in mind:
[*] Samsung SM-N920I Flash Tool: If you need to download the latest version of Odin Downloader Tool, then head over to Odin Downloader for WINDOWS .
[*] Backup Please: Take a backup of your important data before Flashing Samsung SM-N920I Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Samsung SM-N920I:If you would like to know how to root your Samsung SM-N920I android device, drop a comment below. We will share the tutorial for your device as quickly as possible .