Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Spice MI-1010 (Original firmware) , If you searching for the Spice MI-1010 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Spice MI-1010 , Here you can download the Official Spice MI-1010 Stock Firmware ROM (flash file) on your Computer
Download Spice MI-1010 Stock Rom (Original firmware)
Requirements: Your Spice MI-1010 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Spice_MI-1010_Stellar_Pad_V12-[flash-file.net].zip
Flash File Size: 307 MB
Flash Tool Link: RockChip Batch Tool
How to Flash Stock Firmware ROM on Spice MI-1010
To install the Stock Firmware on Spice MI-1010 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Spice MI-1010 .
Step 1: Download and install Rockchip Driver Assistant on your computer. 
Step 2: Download and extract RockChip Batch Tool on your computer. After Extracting you will be able to see the following files: 
Step 3: Now open RKBatchTool.exe from the extracted files. 
Step 4: Once RKBatchTool.exe is launched, Click on the Box right to the FW Path. 
Step 5: Once you have succesfully added the firmware, RockChip Tool will load it. 
Step 6: Now, Turn Off your Spice MI-1010 Device and tablets. 
Step 7: Now, Press and Hold Volume UP Key on your Spice MI-1010 Device and connect it to the computer using the USB cable.
Step 8: Do not release the Volume UP Key on your Spice MI-1010 Device until Icon 1 turns Green in Color. 
Step 9: Once your Spice MI-1010 Device is successfully added to the computer, Click on the Restore Button to begin the Flashing process. 
Step 10: Now, RockChip Batch Tool will Flash the Firmware on your Spice MI-1010 Device (flashing usually takes 4-6 minutes to complete).
Step 13: Once Flashing is completed successfully then you will be able to see Restore Done Success Message. 
Step 14: Now, close RockChip Batch Tool by clicking on the Exit Button.
Step 15: Disconnect your Spice MI-1010 Device from the Computer and Restart it.
Congratulations, Now you have successfully flashed the stock firmware on your Spice MI-1010 using RockChip Batch Tool.
Keep in mind:
[*] Spice MI-1010 Flash Tool: If you need to download the latest version of RockChip Batch Tool, then head over to RockChip Batch Tool .
[*] Backup Please: Take a backup of your important data before Flashing Spice MI-1010 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Spice MI-1010:If you would like to know how to root your Spice MI-1010 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
