Home / Spice / Spice MI-710

How To Flash Stock Rom Firmware On Spice MI-710

These are the instructions to download Flash or install Stock Firmware (ROM) on Spice MI-710 (Original firmware) , If you searching for the Spice MI-710 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Spice MI-710 , Here you can download the Official Spice MI-710 Stock Firmware ROM (flash file) on your Computer

Download Spice MI-710 Stock Rom (Original firmware)

Requirements: Your Spice MI-710 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Spice_MI-710_20150611-[flash-file.net].zip
Flash File Size: 410 MB
Flash Tool Link: LiveSuit Tool

Download Flash File

How to Flash Stock Firmware ROM on Spice MI-710

To install the Stock Firmware on Spice MI-710 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Spice MI-710 .

Step 1: Download and install Spice MI-710 ADB Drivers on your computer. Step 2: Download and extract LiveSuit Application on your computer. After Extracting you will be able to see the following files: Guide To flash Official Stock ROM On Android device Step 3: Now LiveSuit.exe from the extracted files. Guide To flash Official Stock ROM On Android device Step 4: Once LiveSuit.exe is launched, Select Yes to follow the Upgrade Wizard.Guide To flash Official Stock ROM On Android device   Step 5: Now, You have to select the Upgrade Mode which is General and Mandatory. Click on Mandatory to continue.Guide To flash Official Stock ROM On Android device   Step 6: Now, Unplug all the connected Spice MI-710 device from the computer (if you have already connected), then Click on Yes button to Continue.Guide To flash Official Stock ROM On Android device   Step 7: Next, You have to select the .img firmware. If you are ready Click on Yes Button and select the firmware. Guide To flash Official Stock ROM On Android device Step 8: Now, Dont Click on Finish Button.

Step 9: Now, It is the right time to connect your Spice MI-710 device to the Computer using USB Cable. Before Connecting the Spice MI-710 device, make sure its Power Off. Firstly Connect the USB Cable to the Computer then on your Spice MI-710 device Press Volume Down Key and Connect the USB Cable to it. While holding the Volume Down Key immediately Press Power Key for 10 times, so that the computer can recognize your Android device.

Step 10: Once your Spice MI-710 device is successfully recognized by your computer, you will be able to see the following Window saying to Mandatory Format the Device. Click on Yes to Continue. Step 11: On the next Windows, again click on Yes Button to continue.

Step 12: Now LiveSuite will start the flashing process (flashing usually takes 4-6 minutes to complete). Step 13: Once Flashing is completed successfully then you will be able to see Upgrade Succeeds Window. Click on OK to Close it. Step 14: Now, close LiveSuit Application by clicking on the Exit Button. Guide To flash Official Stock ROM On Android device Step 15: Disconnect your Android device from the Computer and Restart it.

Congratulations, Now you have successfully flashed the stock firmware on your Spice MI-710 using LiveSuit Application.

Keep in mind:

[*] Spice MI-710 Flash Tool: If you need to download the latest version of LiveSuit Flash Tool, then head over to LiveSuit Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Spice MI-710 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Spice MI-710:If you would like to know how to root your Spice MI-710 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Spice Mi-359 3G

These are the instructions to download Flash or install Stock Firmware (ROM) on Spice Mi-359 …

Leave a Reply

Your email address will not be published.