How To Flash Stock Rom Firmware On Susan H2

These are the instructions to download Flash or install Stock Firmware (ROM) on Susan H2 (Original firmware) , If you searching for the Susan H2 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Susan H2 , Here you can download the Official Susan H2Stock Firmware ROM (flash file) on your Computer .

DownloadSusan H2 Stock Rom (Original firmware)

Requirements: Your Susan H2 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Susan_H2_MT6572_20170809_4.4.2-[flash-file.net].zip
Flash File Size: 260 MB

Download Flash File

---

Flash File Name: Susan_H2_SC6820_20170602_2.3.5_SPD-[flash-file.net].zip
Flash File Size: 150 MB

Download Flash File

How to Flash Stock Firmware ROM on Susan H2

To install the Stock Firmware on Susan H2 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Susan H2 .

STEP 1: Download and Install the Susan H2 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Susan H2 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Susan H2 to your system using the USB cable and , press any button other than power button so that your system will detect your Susan H2 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Susan H2 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Susan H2 using SP Flash Tool.

Keep in mind:

[*] Susan H2 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Susan H2 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

[*] Broken link Report here.

[*] ROOT Susan H2:If you would like to know how to root your Susan H2 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .