Home / Susan / Susan H3

How To Flash Stock Rom Firmware On Susan H3

These are the instructions to download Flash or install Stock Firmware (ROM) on Susan H3 (Original firmware) , If you searching for the Susan H3 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Susan H3 , Here you can download the Official Susan H3Stock Firmware ROM (flash file) on your Computer .

DownloadSusan H3 Stock Rom (Original firmware)

Requirements: Your Susan H3 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Susan_H3_MT6572_20170822_4.4.2-[flash-file.net].zip
Flash File Size: 268 MB

Download Flash File


Flash File Name: Susan_H3_SC6820_20170603_2.3.5_SPD-[flash-file.net].zip
Flash File Size: 157 MB

Download Flash File

How to Flash Stock Firmware ROM on Susan H3

To install the Stock Firmware on Susan H3 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Susan H3 .

STEP 1: Download and Install the Susan H3 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Susan H3 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Susan H3 to your system using the USB cable and , press any button other than power button so that your system will detect your Susan H3 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Susan H3 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Susan H3 using SP Flash Tool.

Keep in mind:

[*] Susan H3 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Susan H3 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

[*] Broken link Report here.

[*] ROOT Susan H3:If you would like to know how to root your Susan H3 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Susan H5

These are the instructions to download Flash or install Stock Firmware (ROM) on Susan H5 …

Home / Susan / Susan H3

How To Flash Stock Rom Firmware On Susan H3

These are the instructions to download Flash or install Stock Firmware (ROM) on Susan H3 (Original firmware) , If you searching for the Susan H3 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Susan H3 , Here you can download the Official Susan H3Stock Firmware ROM (flash file) on your Computer .

DownloadSusan H3 Stock Rom (Original firmware)

Requirements: Your Susan H3 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Susan_H3_MT6572_20170822_4.4.2-[flash-file.net].zip
Flash File Size: 268 MB

Download Flash File


Flash File Name: Susan_H3_SC6820_20170603_2.3.5_SPD-[flash-file.net].zip
Flash File Size: 157 MB

Download Flash File

How to Flash Stock Firmware ROM on Susan H3

To install the Stock Firmware on Susan H3 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Susan H3 .

STEP 1: Download and Install the Susan H3 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Susan H3 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Susan H3 to your system using the USB cable and , press any button other than power button so that your system will detect your Susan H3 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Susan H3 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Susan H3 using SP Flash Tool.

Keep in mind:

[*] Susan H3 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Susan H3 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

[*] Broken link Report here.

[*] ROOT Susan H3:If you would like to know how to root your Susan H3 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Susan H5

These are the instructions to download Flash or install Stock Firmware (ROM) on Susan H5 …

Leave a Reply

Your email address will not be published. Required fields are marked *