Home / Swipe / Swipe Elite Max

How To Flash Stock Rom Firmware On Swipe Elite Max

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Elite Max (Original firmware) , If you searching for the Swipe Elite Max Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Elite Max , Here you can download the Official Swipe Elite Max Stock Firmware ROM (flash file) on your Computer

Download Swipe Elite Max Stock Rom (Original firmware)

Requirements: Your Swipe Elite Max Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Swipe_Elite_Max_T402W_V12_161118_CN_FHD-[flash-file.net].zip
Flash File Size: 1 GB
ROM Android Version: 6.0
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on Swipe Elite Max

To install the Stock Firmware on Swipe Elite Max , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Elite Max .

Step 1: Donload and install Swipe Elite Max USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Guide To flash Official Stock ROM On Android device Step 5: Now, Switch Off your Swipe Elite Max device. Step 6: Once your Swipe Elite Max device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn). Guide To flash Official Stock ROM On Android device   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. flash Official Stock ROM On Android device Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Swipe Elite Max device will be reboot automatically. Thats It, We are done!. Now disconnect your Swipe Elite Max device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Swipe Elite Max using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Swipe Elite Max Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Swipe Elite Max Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Swipe Elite Max:If you would like to know how to root your Swipe Elite Max android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Swipe 3D

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe 3D …

Leave a Reply

Your email address will not be published.