How To Flash Stock Rom Firmware On Swipe Elite Star

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Elite Star (Original firmware) , If you searching for the Swipe Elite Star Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Elite Star , Here you can download the Official Swipe Elite Star Stock Firmware ROM (flash file) on your Computer

Download Swipe Elite Star Stock Rom (Original firmware)

Requirements: Your Swipe Elite Star Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Swipe_Elite_Star_V1.0_05122016-[flash-file.net].zip
Flash File Size: 832 MB
ROM Android Version: 6.0
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Swipe Elite Star

To install the Stock Firmware on Swipe Elite Star , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Elite Star .

Step 1: Download and Install Swipe Elite Star USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Swipe Elite Star Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Swipe Elite Star Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Swipe Elite Star is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Swipe Elite Star Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Swipe Elite Star using Spreadtrum Upgrade Tool. Once your Swipe Elite Star Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Swipe Elite Star using Spreadtrum Upgrade Tool

Keep in mind:

[*] Swipe Elite Star Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Swipe Elite Star Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Swipe Elite Star:If you would like to know how to root your Swipe Elite Star android device, drop a comment below. We will share the tutorial for your device as quickly as possible .