Home / Swipe / Swipe Halo Fone

» Swipe Halo Fone

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Halo Fone (Original firmware) , If you searching for the Swipe Halo Fone Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Halo Fone , Here you can download the Official Swipe Halo Fone Stock Firmware ROM (flash file) on your Computer

Download Swipe Halo Fone Stock Rom (Original firmware)

Requirements: Your Swipe Halo Fone Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Swipe_Halo_Fone_New_PCBA_GP650_20140920-[flash-file.net].zip
Flash File Size: 659 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Swipe_Halo_Fone_MT6572_v2.1_GP650_3G_20140305-[flash-file.net].zip
Flash File Size: 587 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Swipe Halo Fone

To install the Stock Firmware on Swipe Halo Fone , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Halo Fone .

STEP 1: Download and Install the Swipe Halo Fone USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Swipe Halo Fone device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Swipe Halo Fone STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Swipe Halo FoneHow To Flash Stock Rom Firmware On Swipe Halo Fone

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Swipe Halo Fone STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Swipe Halo Fone STEP 9: After completed all the above steps, connect your Swipe Halo Fone to your system using the USB cable and , press any button other than power button so that your system will detect your Swipe Halo Fone Device. You can use volume buttons. How To Flash Stock Rom Firmware On Swipe Halo Fone How To Flash Stock Rom Firmware On Swipe Halo Fone Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Swipe Halo Fone and switch it ON.How To Flash Stock Rom Firmware On Swipe Halo FoneHow To Flash Stock Rom Firmware On Swipe Halo FoneCongratulations, Now you have successfully flashed the stock firmware on your Swipe Halo Fone using SP Flash Tool.

Keep in mind:

[*] Swipe Halo Fone Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Swipe Halo Fone Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Swipe Halo Fone:If you would like to know how to root your Swipe Halo Fone android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Swipe 3D

Swipe 3D

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe 3D …

Leave a Reply

%d bloggers like this: