Home / Swipe / Swipe Junior

» Swipe Junior

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Junior (Original firmware) , If you searching for the Swipe Junior Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Junior , Here you can download the Official Swipe Junior Stock Firmware ROM (flash file) on your Computer

Download Swipe Junior Stock Rom (Original firmware)

Requirements: Your Swipe Junior Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Swipe_Junior_V1.2_D1_FWVGA_EMMC_32_4_V01-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Swipe Junior

To install the Stock Firmware on Swipe Junior , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Junior .

STEP 1: Download and Install the Swipe Junior USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Swipe Junior device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Swipe Junior STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Swipe JuniorHow To Flash Stock Rom Firmware On Swipe Junior

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Swipe Junior STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Swipe Junior STEP 9: After completed all the above steps, connect your Swipe Junior to your system using the USB cable and , press any button other than power button so that your system will detect your Swipe Junior Device. You can use volume buttons. How To Flash Stock Rom Firmware On Swipe Junior How To Flash Stock Rom Firmware On Swipe Junior Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Swipe Junior and switch it ON.How To Flash Stock Rom Firmware On Swipe JuniorHow To Flash Stock Rom Firmware On Swipe JuniorCongratulations, Now you have successfully flashed the stock firmware on your Swipe Junior using SP Flash Tool.

Keep in mind:

[*] Swipe Junior Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Swipe Junior Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Swipe Junior:If you would like to know how to root your Swipe Junior android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Swipe 3D

Swipe 3D

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe 3D …

Leave a Reply

%d bloggers like this: