How To Flash Stock Rom Firmware On Swipe Konnect 3

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Konnect 3 (Original firmware) , If you searching for the Swipe Konnect 3 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Konnect 3 , Here you can download the Official Swipe Konnect 3 Stock Firmware ROM (flash file) on your Computer

Download Swipe Konnect 3 Stock Rom (Original firmware)

Requirements: Your Swipe Konnect 3 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Swipe_Konnect_3_V09_20150209_rda_total-[flash-file.net].zip
Flash File Size: 226 MB

Download Flash File

---

Flash File Name: Swipe_Konnect_3_V11_20150810_RDA_total-[flash-file.net].zip
Flash File Size: 244 MB

Download Flash File

How to Flash Stock Firmware ROM on Swipe Konnect 3

To install the Stock Firmware on Swipe Konnect 3 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Konnect 3 .

Step 1: Download and install the RDA USB Drivers on your Computer. If RDA Drivers are already installed on your computer then Skip this Step. Step 2: Download and extract Multi IEdownload Tool on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open Multi_IEdownload_eng.exe. Step 4: Once Multi IEdownload Tool is launched, you will be able to see the following screen: Step 5: Now, Click on the browse button and locate the RDA Bin file from your computer. Step 6: Now, connect your Swipe Konnect 3 to the computer (make sure Swipe Konnect 3 is power off and battery is not removed). Step 7: Now, click on the Start All button to begin the flashing process. Step 8: Flashing process will take few minutes to flash the firmware on your Swipe Konnect 3. Once flashing is completed you will be able to see the success message on the screen.

Congratulations, Now you have successfully flashed the stock firmware on your Swipe Konnect 3 using Multi IEdownload Tool

Keep in mind:

[*] Backup Please: Take a backup of your important data before Flashing Swipe Konnect 3 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Swipe Konnect 3:If you would like to know how to root your Swipe Konnect 3 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .