These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Konnect Power (Original firmware) , If you searching for the Swipe Konnect Power Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Konnect Power , Here you can download the Official Swipe Konnect Power Stock Firmware ROM (flash file) on your Computer
Download Swipe Konnect Power Stock Rom (Original firmware)
Requirements: Your Swipe Konnect Power Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Swipe_Konnect_Power_V1.9_20170721_SPD-[flash-file.net].zip
Flash File Size: 788 MB
Flash Tool Link: SPD Flash Tool
How to Flash Stock Firmware ROM on Swipe Konnect Power
To install the Stock Firmware on Swipe Konnect Power , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Konnect Power .
Step 1: Download and Install Swipe Konnect Power USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your Swipe Konnect Power Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Swipe Konnect Power Device to the computer (make sure your Android Device is switch off).
Step 6: Once your Swipe Konnect Power is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your Swipe Konnect Power Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Swipe Konnect Power using Spreadtrum Upgrade Tool. Once your Swipe Konnect Power Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your Swipe Konnect Power using Spreadtrum Upgrade Tool
Keep in mind:
[*] Swipe Konnect Power Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .
[*] Backup Please: Take a backup of your important data before Flashing Swipe Konnect Power Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Swipe Konnect Power:If you would like to know how to root your Swipe Konnect Power android device, drop a comment below. We will share the tutorial for your device as quickly as possible .