Home / Swipe / Swipe MTV Slash

» Swipe MTV Slash

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe MTV Slash (Original firmware) , If you searching for the Swipe MTV Slash Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe MTV Slash , Here you can download the Official Swipe MTV Slash Stock Firmware ROM (flash file) on your Computer

Download Swipe MTV Slash Stock Rom (Original firmware)

Requirements: Your Swipe MTV Slash Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Swipe_MTV_Slash_2013.08.01-[flash-file.net].zip
Flash File Size: 553 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Swipe_MTV_Slash_2013.09.26-[flash-file.net].zip
Flash File Size: 624 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Swipe_MTV_Slash_8312V_3G_1GB_RAM_20140514-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Swipe_MTV_512_3G_8312-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Swipe MTV Slash

To install the Stock Firmware on Swipe MTV Slash , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe MTV Slash .

STEP 1: Download and Install the Swipe MTV Slash USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Swipe MTV Slash device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Swipe MTV Slash STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Swipe MTV SlashHow To Flash Stock Rom Firmware On Swipe MTV Slash

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Swipe MTV Slash STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Swipe MTV Slash STEP 9: After completed all the above steps, connect your Swipe MTV Slash to your system using the USB cable and , press any button other than power button so that your system will detect your Swipe MTV Slash Device. You can use volume buttons. How To Flash Stock Rom Firmware On Swipe MTV Slash How To Flash Stock Rom Firmware On Swipe MTV Slash Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Swipe MTV Slash and switch it ON.How To Flash Stock Rom Firmware On Swipe MTV SlashHow To Flash Stock Rom Firmware On Swipe MTV SlashCongratulations, Now you have successfully flashed the stock firmware on your Swipe MTV Slash using SP Flash Tool.

Keep in mind:

[*] Swipe MTV Slash Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Swipe MTV Slash Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Swipe MTV Slash:If you would like to know how to root your Swipe MTV Slash android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Swipe 3D

Swipe 3D

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe 3D …

Leave a Reply

%d bloggers like this: