Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Slice (Original firmware) , If you searching for the Swipe Slice Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Slice , Here you can download the Official Swipe Slice Stock Firmware ROM (flash file) on your Computer
Download Swipe Slice Stock Rom (Original firmware)
Requirements: Your Swipe Slice Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Swipe_Slice_8312D_V002_Slice_EMMC-[flash-file.net].zip
Flash File Size: 472 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
Flash File Name: Swipe_Slice_EMMC-[flash-file.net].zip
Flash File Size: 472 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
Flash File Name: Swipe_Slice_KK_06.07.2015_140910_SW_for_TP_Issue-[flash-file.net].zip
Flash File Size: 509 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
Flash File Name: Swipe_Slice_MT6571_20141015_4.4.2-[flash-file.net].zip
Flash File Size: 394 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
Flash File Name: Swipe_Slice_New_SW-[flash-file.net].zip
Flash File Size: 616 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Swipe Slice
To install the Stock Firmware on Swipe Slice , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Slice .
STEP 1: Download and Install the Swipe Slice USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Swipe Slice device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Swipe Slice to your system using the USB cable and , press any button other than power button so that your system will detect your Swipe Slice Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Swipe Slice and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Swipe Slice using SP Flash Tool.
Keep in mind:
[*] Swipe Slice Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Swipe Slice Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Swipe Slice:If you would like to know how to root your Swipe Slice android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
