Home / Swipe / Swipe Strike 4G

How To Flash Stock Rom Firmware On Swipe Strike 4G

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Strike 4G (Original firmware) , If you searching for the Swipe Strike 4G Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Strike 4G , Here you can download the Official Swipe Strike 4G Stock Firmware ROM (flash file) on your Computer

Download Swipe Strike 4G Stock Rom (Original firmware)

Requirements: Your Swipe Strike 4G Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Swipe_Strike_4G_V10_20160803_SPD-[flash-file.net].zip
Flash File Size: 735 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Swipe Strike 4G

To install the Stock Firmware on Swipe Strike 4G , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Strike 4G .

Step 1: Download and Install Swipe Strike 4G USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Swipe Strike 4G Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Swipe Strike 4G Device to the computer (make sure your Android Device is switch off).

Guide To flash Official Stock ROM On Android Device

Step 6: Once your Swipe Strike 4G is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).Guide To flash Official Stock ROM On Android Device Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Guide To flash Official Stock ROM On Android Device

Step 8: During the flashing process your Swipe Strike 4G Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device

Step 9: Now you have successfully flashed your Swipe Strike 4G using Spreadtrum Upgrade Tool. Once your Swipe Strike 4G Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Swipe Strike 4G using Spreadtrum Upgrade Tool

Keep in mind:

[*] Swipe Strike 4G Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Swipe Strike 4G Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Swipe Strike 4G:If you would like to know how to root your Swipe Strike 4G android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Swipe Fablet F2

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Fablet …

Leave a Reply

Your email address will not be published.