Home / Swipe / Swipe Velocity Tab

» Swipe Velocity Tab

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Velocity Tab (Original firmware) , If you searching for the Swipe Velocity Tab Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Velocity Tab , Here you can download the Official Swipe Velocity Tab Stock Firmware ROM (flash file) on your Computer

Download Swipe Velocity Tab Stock Rom (Original firmware)

Requirements: Your Swipe Velocity Tab Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Swipe_Velocity_Tab_20121107_V16-[flash-file.net].zip
Flash File Size: 413 MB
Flash Tool Link: RockChip Batch Tool

Download Flash File

How to Flash Stock Firmware ROM on Swipe Velocity Tab

To install the Stock Firmware on Swipe Velocity Tab , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Velocity Tab .

Step 1: Download and install Rockchip Driver Assistant on your computer. How To Flash Stock Rom Firmware On Swipe Velocity Tab Step 2: Download and extract RockChip Batch Tool on your computer. After Extracting you will be able to see the following files: How To Flash Stock Rom Firmware On Swipe Velocity Tab Step 3: Now open RKBatchTool.exe from the extracted files. How To Flash Stock Rom Firmware On Swipe Velocity Tab Step 4: Once RKBatchTool.exe is launched, Click on the Box right to the FW Path. How To Flash Stock Rom Firmware On Swipe Velocity Tab How To Flash Stock Rom Firmware On Swipe Velocity Tab   Step 5: Once you have succesfully added the firmware, RockChip Tool will load it. How To Flash Stock Rom Firmware On Swipe Velocity Tab Step 6: Now, Turn Off your Swipe Velocity Tab Device and tablets. How To Flash Stock Rom Firmware On Swipe Velocity Tab Step 7: Now, Press and Hold Volume UP Key on your Swipe Velocity Tab Device and connect it to the computer using the USB cable.

Step 8: Do not release the Volume UP Key on your Swipe Velocity Tab Device until Icon 1 turns Green in Color. How To Flash Stock Rom Firmware On Swipe Velocity Tab Step 9: Once your Swipe Velocity Tab Device is successfully added to the computer, Click on the Restore Button to begin the Flashing process. How To Flash Stock Rom Firmware On Swipe Velocity Tab Step 10: Now, RockChip Batch Tool will Flash the Firmware on your Swipe Velocity Tab Device (flashing usually takes 4-6 minutes to complete).

Step 13: Once Flashing is completed successfully then you will be able to see Restore Done Success Message. How To Flash Stock Rom Firmware On Swipe Velocity Tab Step 14: Now, close RockChip Batch Tool by clicking on the Exit Button.

  Step 15: Disconnect your Swipe Velocity Tab Device from the Computer and Restart it.

Congratulations, Now you have successfully flashed the stock firmware on your Swipe Velocity Tab using RockChip Batch Tool.

Keep in mind:

[*] Swipe Velocity Tab Flash Tool: If you need to download the latest version of RockChip Batch Tool, then head over to RockChip Batch Tool .

[*] Backup Please: Take a backup of your important data before Flashing Swipe Velocity Tab Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Swipe Velocity Tab:If you would like to know how to root your Swipe Velocity Tab android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Swipe 3D

Swipe 3D

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe 3D …

Leave a Reply

%d bloggers like this: