Home / Symphony / Symphony H100

How To Flash Stock Rom Firmware On Symphony H100

These are the instructions to download Flash or install Stock Firmware (ROM) on Symphony H100 (Original firmware) , If you searching for the Symphony H100 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Symphony H100 , Here you can download the Official Symphony H100 Stock Firmware ROM (flash file) on your Computer

Download Symphony H100 Stock Rom (Original firmware)

Requirements: Your Symphony H100 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Symphony_H100_V02.0_V1.0_4.4.2_MT6582-[flash-file.net].zip
Flash File Size: 712 MB

Download Flash File


Flash File Name: Symphony_H100_V02.2_V1.0_KOT49H-[flash-file.net].zip
Flash File Size: 713 MB

Download Flash File

How to Flash Stock Firmware ROM on Symphony H100

To install the Stock Firmware on Symphony H100 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Symphony H100 .

Requirements: If you are using any Anti-Virus Application on your computer then Disable it or Uninstall it before following the tutorial below.

Step 1: Download and extract Piranha box Tool. After Extracting you will be able to see the following files: Step 2: Download the Stock Rom (bin format) that you want to Flash on your Symphony H100 Device and extract it on your Computer.

Step 3: Now, Open Piranha_Box-V1.46_Crack_Only_DzCraXx.exe (you have extracted this in Step#1) on Your Computer. Step 4: Once Piranha box Tool is launched, Click on Chinese Tool Button. Step 5: Now, Under the Chinese Tools you will be able to see MTK Chipset Tool. Click on the Maximize Button. Step 6: In MTK Chipset Tool Select Write. Step 7: Now, Click on the Browse Button and locate the .bin firmware that you have downloaded in Step#3. Step 8: Now, Under Boot Select 8th Boot (mt65xx). Step 9: Now, Select USB Mode Button. Step 10: Now, Select Cable Name USB_(Cable&Mode). PiranhaBox Select USB Cable Step 11: Now, Connect your Symphony H100 Device to the Computer (make sure it is power Off).

Step 12: Now, Click on the Start Button to Begin the Flashing Process. Step 13: Once Flashing is completed, you will be able to see Green Pass Status.

Step 14: Now, close Piranhabox Tool and disconnect your Symphony H100 Device from the computer.

Congratulations, Now you have successfully flashed the stock firmware on your Symphony H100 using Piranhabox Tool.

Keep in mind:

[*] Backup Please: Take a backup of your important data before Flashing Symphony H100 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Symphony H100:If you would like to know how to root your Symphony H100 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Symphony H20

These are the instructions to download Flash or install Stock Firmware (ROM) on Symphony H20 …

Leave a Reply

Your email address will not be published. Required fields are marked *