Home / Tecno / Tecno B6S

How To Flash Stock Rom Firmware On Tecno B6S

These are the instructions to download Flash or install Stock Firmware (ROM) on Tecno B6S (Original firmware) , If you searching for the Tecno B6S Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Tecno B6S , Here you can download the Official Tecno B6S Stock Firmware ROM (flash file) on your Computer.

DownloadTecno B6S Stock Rom (Original firmware)

Requirements: Your Tecno B6S Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Tecno_B6S_4.4.4-[flash-file.net].zip
Flash File Size: 787 MB
ROM Android Version: 4.4.4
Flash Tool Link: QFIL Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Tecno B6S

To install the Stock Firmware on the Tecno B6S , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Tecno B6S .

Step 1: Donload and install Tecno B6S USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Guide To flash Official Stock ROM On Android device Step 5: Now, Switch Off your Tecno B6S device. Step 6: Once your Tecno B6S device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn). Guide To flash Official Stock ROM On Android device   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. flash Official Stock ROM On Android device Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Tecno B6S device will be reboot automatically. Thats It, We are done!. Now disconnect your Tecno B6S device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Tecno B6S using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Tecno B6S Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Tecno B6S Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Tecno B6S:If you would like to know how to root your Tecno B6S android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Tecno T1

These are the instructions to download Flash or install Stock Firmware (ROM) on Tecno T1 …

Leave a Reply

Your email address will not be published. Required fields are marked *