Home / Tecno / Tecno WX3

How To Flash Stock Rom Firmware On Tecno WX3

These are the instructions to download Flash or install Stock Firmware (ROM) on Tecno WX3 (Original firmware) , If you searching for the Tecno WX3 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Tecno WX3 , Here you can download the Official Tecno WX3 Stock Firmware ROM (flash file) on your Computer.

DownloadTecno WX3 Stock Rom (Original firmware)

Requirements: Your Tecno WX3 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Tecno_WX3_MT6580_V80_170703_7.0-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Tecno_WX3_MT6580_V92_170511_7.0-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Tecno_WX3_MT6580_V110_170830-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Tecno WX3

To install the Stock Firmware on the Tecno WX3 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Tecno WX3 .

Step 1: Download and Install Tecno WX3 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Tecno WX3 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Tecno WX3 Device to the computer (make sure your Android Device is switch off).

Guide To flash Official Stock ROM On Android Device

Step 6: Once your Tecno WX3 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).Guide To flash Official Stock ROM On Android Device Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Guide To flash Official Stock ROM On Android Device

Step 8: During the flashing process your Tecno WX3 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device

Step 9: Now you have successfully flashed your Tecno WX3 using Spreadtrum Upgrade Tool. Once your Tecno WX3 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Tecno WX3 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Backup Please: Take a backup of your important data before Flashing Tecno WX3 Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Tecno WX3:If you would like to know how to root your Tecno WX3 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Tecno T1

These are the instructions to download Flash or install Stock Firmware (ROM) on Tecno T1 …

Leave a Reply

Your email address will not be published. Required fields are marked *