Tecno WX4

These are the instructions to download Flash or install Stock Firmware (ROM) on Tecno WX4 (Original firmware) , If you searching for the Tecno WX4 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Tecno WX4 , Here you can download the Official Tecno WX4 Stock Firmware ROM (flash file) on your Computer.

DownloadTecno WX4 Stock Rom (Original firmware)

Requirements: Your Tecno WX4 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Tecno_WX4_MT6580_V103_170617_7.0-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Tecno_WX4_MT6580_V137_180111_7.0-[flash-file.net].zip
Flash File Size: 2 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Tecno WX4

To install the Stock Firmware on Tecno WX4 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Tecno WX4 .

STEP 1: Download and Install the Tecno WX4 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Tecno WX4 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Tecno WX4 STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Tecno WX4How To Flash Stock Rom Firmware On Tecno WX4

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Tecno WX4 STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Tecno WX4 STEP 9: After completed all the above steps, connect your Tecno WX4 to your system using the USB cable and , press any button other than power button so that your system will detect your Tecno WX4 Device. You can use volume buttons. How To Flash Stock Rom Firmware On Tecno WX4 How To Flash Stock Rom Firmware On Tecno WX4 Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Tecno WX4 and switch it ON.How To Flash Stock Rom Firmware On Tecno WX4How To Flash Stock Rom Firmware On Tecno WX4Congratulations, Now you have successfully flashed the stock firmware on your Tecno WX4 using SP Flash Tool.

Keep in mind:

[*] Tecno WX4 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Tecno WX4 Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Tecno WX4:If you would like to know how to root your Tecno WX4 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Tecno G9

Tecno G9

These are the instructions to download Flash or install Stock Firmware (ROM) on Tecno G9 …

Leave a Reply

%d bloggers like this: