These are the instructions to download Flash or install Stock Firmware (ROM) on Walton Primo D8S (Original firmware) , If you searching for the Walton Primo D8S Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Walton Primo D8S , Here you can download the Official Walton Primo D8S Stock Firmware ROM (flash file) on your Computer
Download Walton Primo D8S Stock Rom (Original firmware)
Requirements: Your Walton Primo D8S Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Walton_Primo_D8S_V1.5_20161121_SPD-[flash-file.net].zip
Flash File Size: 776 MB
Flash Tool Link: SPD Flash Tool
How to Flash Stock Firmware ROM on Walton Primo D8S
To install the Stock Firmware on Walton Primo D8S , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Walton Primo D8S .
Step 1: Download and Install Walton Primo D8S USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your Walton Primo D8S Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Walton Primo D8S Device to the computer (make sure your Android Device is switch off).
Step 6: Once your Walton Primo D8S is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your Walton Primo D8S Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Walton Primo D8S using Spreadtrum Upgrade Tool. Once your Walton Primo D8S Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your Walton Primo D8S using Spreadtrum Upgrade Tool
Keep in mind:
[*] Walton Primo D8S Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .
[*] Backup Please: Take a backup of your important data before Flashing Walton Primo D8S Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Walton Primo D8S:If you would like to know how to root your Walton Primo D8S android device, drop a comment below. We will share the tutorial for your device as quickly as possible .