Home / Walton / Walton Primo H8 Turbo

How To Flash Stock Rom Firmware On Walton Primo H8 Turbo

These are the instructions to download Flash or install Stock Firmware (ROM) on Walton Primo H8 Turbo (Original firmware) , If you searching for the Walton Primo H8 Turbo Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Walton Primo H8 Turbo , Here you can download the Official Walton Primo H8 Turbo Stock Firmware ROM (flash file) on your Computer

Download Walton Primo H8 Turbo Stock Rom (Original firmware)

Requirements: Your Walton Primo H8 Turbo Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Walton_Primo_H8_Turbo_MT6739_2GB_Ram_V24_20190717-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: Walton_Primo_H8_Turbo_MT6739_3GB_Ram_V25_20190723-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Walton Primo H8 Turbo

To install the Stock Firmware on Walton Primo H8 Turbo , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Walton Primo H8 Turbo .

STEP 1: Download and Install the Walton Primo H8 Turbo USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Walton Primo H8 Turbo device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Walton Primo H8 Turbo to your system using the USB cable and , press any button other than power button so that your system will detect your Walton Primo H8 Turbo Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Walton Primo H8 Turbo and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Walton Primo H8 Turbo using SP Flash Tool.

Keep in mind:

[*] Walton Primo H8 Turbo Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Walton Primo H8 Turbo Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Walton Primo H8 Turbo:If you would like to know how to root your Walton Primo H8 Turbo android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Walton Primo H1

These are the instructions to download Flash or install Stock Firmware (ROM) on Walton Primo …

Leave a Reply

Your email address will not be published. Required fields are marked *