Home / Wikoo / Wikoo W100 Duo

How To Flash Stock Rom Firmware On Wikoo W100 Duo

These are the instructions to download Flash or install Stock Firmware (ROM) on Wikoo W100 Duo (Original firmware) , If you searching for the Wikoo W100 Duo Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Wikoo W100 Duo , Here you can download the Official Wikoo W100 DuoStock Firmware ROM (flash file) on your Computer .

DownloadWikoo W100 Duo Stock Rom (Original firmware)

Requirements: Your Wikoo W100 Duo Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Wikoo_W100_Duo_MT6580_180716_5.1-[flash-file.net].zip
Flash File Size: 682 MB

Download Flash File


Flash File Name: Wikoo_W100_Duo_MT6580_5.1-[flash-file.net].zip
Flash File Size: 685 MB

Download Flash File

How to Flash Stock Firmware ROM on Wikoo W100 Duo

To install the Stock Firmware on Wikoo W100 Duo Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Wikoo W100 Duo .

STEP 1: Download and Install the Wikoo W100 Duo USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Wikoo W100 Duo device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Wikoo W100 Duo to your system using the USB cable and , press any button other than power button so that your system will detect your Wikoo W100 Duo Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Wikoo W100 Duo and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Wikoo W100 Duo using SP Flash Tool.

Keep in mind:

[*] Wikoo W100 Duo Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Wikoo W100 Duo Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

[*] Broken link Report here.

[*] ROOT Wikoo W100 Duo:If you would like to know how to root your Wikoo W100 Duo android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Wikoo K200

These are the instructions to download Flash or install Stock Firmware (ROM) on Wikoo K200 …

Leave a Reply

Your email address will not be published. Required fields are marked *