Home / Winds / Winds Note Vivo

How To Flash Stock Rom Firmware On Winds Note Vivo

These are the instructions to download Flash or install Stock Firmware (ROM) on Winds Note Vivo (Original firmware) , If you searching for the Winds Note Vivo Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Winds Note Vivo , Here you can download the Official Winds Note Vivo Stock Firmware ROM (flash file) on your Computer

Download Winds Note Vivo Stock Rom (Original firmware)

Requirements: Your Winds Note Vivo Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Winds_Note_Vivo_MT6572_20141103_4.2.2-[flash-file.net].zip
Flash File Size: 179 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Winds Note Vivo

To install the Stock Firmware on Winds Note Vivo 11545552211111STEP [3]: Install the Vivovided USB Driver on your Computer, and if in case USB Driver is already installed, SKIP this step).7777577777 Winds Note Vivo .

STEP 1: Download and Install the Winds Note Vivo USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Winds Note Vivo device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Winds Note Vivo to your system using the USB cable and , press any button other than power button so that your system will detect your Winds Note Vivo Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Winds Note Vivo and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Winds Note Vivo using SP Flash Tool.

Keep in mind:

[*] Winds Note Vivo Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Winds Note Vivo Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Winds Note Vivo:If you would like to know how to root your Winds Note Vivo android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Winds Note Grace IV

These are the instructions to download Flash or install Stock Firmware (ROM) on Winds Note …

Leave a Reply

Your email address will not be published. Required fields are marked *